Structure and properties of cast steels depending on thermokinetic parameters of treatment and crystallization of melt

Authors

  • S.Ye. Kondratyuk Physico-Technological Institute of Metals and Alloys of NAS of Ukraine, Kyiv
  • V.I. Veis Physico-Technological Institute of Metals and Alloys of NAS of Ukraine, Kyiv
  • Z.V. Parkhomchuk Physico-Technological Institute of Metals and Alloys of NAS of Ukraine, Kyiv
  • O.O. Tokareva Physico-Technological Institute of Metals and Alloys of NAS of Ukraine, Kyiv

DOI:

https://doi.org/10.15407/mom2019.02.032

Keywords:

steel, melt, crystallization, mechanical properties

Abstract

The effect of the overheating temperature of steel melts above equilibrium liquidus (20…170 °C) and cooling rate at crystallization (5…650 °C/c) on characteristics of cast structure and mechanical properties of  structural steels 25Л, 25ХГСТФЛ, 45Л, 45ХГСТФЛ was researched. The regular increase in the dispersion and mechanical properties of their cast structure under conditions of rapid cooling and an increase in the temperature gradient during crystallization was established. Based on the results of experiments, interpolation equations of the effect of melt overheating and cooling rates on the structural and mechanical properties of steels are obtained. The obtained equations allow to predict the properties of castings within the studied factor space.

References

Efimov V.A. Razlivka i kristallizatsiya stali (Casting and crystallization of steel), Moskva: Metallurgiya, 1976, 552 p. [in Russian].

Veynik A.I. Teplovyye osnovy teorii litya (Thermal foundations of the theory of casting), Moskva: Mashgiz,1948, 163 p. [in Russian].

Kumanin I.B. Voprosy teorii liteynykh protsessov (Questions of the theory of casting processes), Moskva: Mashinostroyeniye, 1976, 216 p. [in Russian].

Gulyayev B.B. Teoriya liteynykh protsessov (Theory of casting processes), Leningrad.: Mashinostroyeniye, 1976, 216 p. [in Russian].

Dreyper N., Smit G. Prikladnoy regressionnyy analiz (Applied regression analysis), Moskva: Mir, 1973, 424 p. [in Russian].

Khartman K., Letski E., Sheffer V. Planirovaniye eksperimenta v issledovanii tekhnologicheskikh protsessov, (Planning of an experiment in the study of technological processes), Moskva: Mir, 1980, 540 p. [in Russian].

Byalik O.M., Kondratyuk S.Ye., Kindrachuk M.V., Chernenko V.S. Strukturniy analiz metaliv. Metalohrafiya, fraktohrafiya (Structural analysis of metals. Metallography, fractography), Kyiv: Politekhnika, 2006, 326 p. [in Ukrainian].

Golikov I.N., Goldshteyn M.I., Murzin O.I. Vanadiy v stali (Vanadium in steel), Moskva: Metallurgiya, 1968, 292 p. [in Russian].

Downloads

Published

2019-06-30

Issue

Vol. 25 No. 2 (2019): The Scientific Technical journal Metal Science and Treatment of Metals

Section

MELTING AND CRYSTALLIZATION

License

Copyright (c) 2019 S.Ye. Kondratyuk, V.I. Veis, Z.V. Parkhomchuk, O.O. Tokareva

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

Structure and properties of cast steels depending on thermokinetic parameters of treatment and crystallization of melt. (2019). Scientific Technical Journal ‘’Metal Science and Treatment of Metals’’, 25(2), 32-43. https://doi.org/10.15407/mom2019.02.032

Similar Articles

1-10 of 212

You may also start an advanced similarity search for this article.

Most read articles by the same author(s)

<< < 1 2