Formation of cast structure in relation to temperature and time parameters of melting and crystallization
DOI:
https://doi.org/10.15407/mom2019.03.030Keywords:
physical modeling, liquidus, superheat temperature, crystallization, structure formation, isothermal treatmentAbstract
The influence of the melt overheating temperature over the equilibrium liquidus and the cooling rate of it during crystallization, the effect of the temperature of the isothermal processing of the melt in the pre-crystallization period and in the temperature interval of crystallization under conditions of normal and high-speed thermal selection on the formation processes of cast structure was researched by methods of physical modeling using transparent model material (camphene). It has been established that the formation of a coarse-grained structure with significant overheating of the melt can be eliminated by its rapid cooling during crystallization, which ensures the formation of a fine-grained structure with a high dispersion of the dendritic structure. It is shown that in a narrow temperature range of underliquidus area during the isothermal processing solid phase crystals form and accumulate without substantially increasing their size, providing the formation of a dispersed cast structure with subsequent rapid melt cooling.
References
Flemings M. Protsessy zatverdevaniya (Hardening processes), Moskva: Metallurgiya, 1977, 424 p. [in Russian].
Ovsiyenko D.Ye. Zarozhdeniye i rost kristal lov iz rasplava (The born and growth of melt crystals), Kyiv: Naukova dumka, 1994, 256 p. [in Russian].
Gavrilin I.V. Plavleniye i kristallizatsiya metallov i splavov (Melting and crystallization of metals and alloys), Vladimir: VlTU, 2000, 255 p. [in Russian].
Veynik A.I. Teoriya zatrverdivaniya olivki (The hardening theory of olives), Moskva: Mashgiz, 1960, 435 p. [in Russian].
Markov B.L., Kirsanov A.A. Fizicheskoye modelirovaniye v metallurgii (Physical modeling in metallurgy), Moskva: Metallurgiya, 1984, 119 p. [in Russian].
Yeronko S.P., Bykovskikh S.V. Fizicheskoye modelirovaniye protsessov vnepechnoy obrabotki i razlivki stali (Physical modeling of out-of-furnace treatment and steel casting processes), Kyiv: Tekhnika, 1998, 136 p. [in Russian].
Eldarkhanov A.S., Yefimov V.A., Nuradinov A.S. Protsessy formirovaniya otlivok i ikh modelirovaniye (Casting formation processes and their modeling), Moskva: Mashinostroyeniye, 2001, 208 p. [in Russian].
Dymnich A.Kh., Korniyets I.V. Osnovy teorii podobiya i fizicheskogo modelirovaniya (Fundamentals of similarity theory and physical modeling), Kyiv: OOO «Nash format», 2016, 172 p. [in Russian].
Kondratyuk S.Ye., Parkhomchuk Z.V., Veys V.I., Metaloznavstvo ta obrobka metaliv, 2018, No 4, pp. 9 – 18 [in Ukrainian].
Byalik O.M., Kondratyuk S.Ye., Kindrachuk M.V., Chernenko V.S. Strukturnyy analiz metaliv. Metalohrafiya, fraktohrafiya (Structural analysis of metals. Metallography, fractography), Kyiv: Politekhnika, 2006, 328 p. [in Ukrainian].
Danilov V.I. Stroyeniye i kristallizatsiya zhidkostey (The structure and crystallization of liquids), Kyiv: Naukova dumka, 1956, 568 p. [in Russian].
Tyagunov G.V. Liteynoye proizvodstvo, 1988, No 2, pp. 8 – 9 [in Russian].
Baum B.A., Khasin G.A., Tyagunov G.V. Zhidkaya stal (Liquid steel), Moskva: Metallurgiya, 1984, 208 p. [in Russian].
Baum B.A., Tyagunov G.V., Baryshev Ye.Ye., Tsepelev V.S. Fundamentalnyye issledovaniya fiziko-khimii metallurgicheskikh rasplavov (Basic research of the physical chemistry of metallurgical melts), Moskva: IKTS Akademkniga, 2002, pp. 214 – 228. [in Russian].
Downloads
Published
Issue
Section
License
Copyright (c) 2019 S.Ye. Kondratyuk, A.S. Nuradinov, Z.V. Parkhomchuk, V.I. Veis
This work is licensed under a Creative Commons Attribution 4.0 International License.
