Transformations during liquid-phase sintering of high-speed alloy powders
DOI:
https://doi.org/10.15407/mom2019.01.009Keywords:
high-speed tool, powder, pressing, phase transformations, carbideAbstract
The laws of phase and structural transformations during sintering of pressed powder mixtures of high-speed steels with different carbon content (0.2% and 3.8% by mass) are investigated. Established regular changes in the characteristics of the structure, depending on the quantitative ratio of the components and the duration of diffuse processes during sintering.
References
Geller Yu.A. Instrumentalnyie stali (Tool steels), Moskva: Metallurgiya, 1975, 84 p. [in Russian].
Revis I.A., Lebedev T.A. Struktura i svoystva litogo rezhuschego instrumenta (Structure and properties of cast cutting tool), Leningrad: Mashinostroenie, 1972, 128 р. [in Russian].
Abramov A.A., Samoylenko L.S., Girshov V.L., Metalloobrabotka, 2008, No 4, pp. 31 – 35 [in Russian].
Ernst I. C., Duh D., Journal of materials science, 2004, No 39, pp. 6831 – 6834 [in English].
https://doi.org/10.1023/B:JMSC.0000045613.54700.35
Poznyak L.A. In: «Poroshkovyie byistrorezhuschie stali (struktura, svoystva, tehnologiya proizvodstva instrumenta)» (Powder high speed steels (structure, properties, production technology of the tool)), Kiev: Naukova dumka, 1990, pp. 5 – 12 [in Russian].
Osadchiy A.N., Revyakin S.V., Kiyko G.V., Stal, 1981, No 11, pp. 83 – 84 [in Russian].
https://doi.org/10.1111/j.1095-8339.1981.tb00130.x
Hallstom U. Mater. Et Techn, 1980, No № 2-3. pp. 61 – 65 [in French].
Parabina G.I., Revyakin S.V., Marchenko L.N. In: «Poluchenie i primenenie raspyilennyih metallicheskih poroshkov» (Preparation and use of powdered metal powders), Kiev, 1982, pp. 98 – 100 [in Russian].
Shlyapin S.D. Sverhsolidusnoe spekanie poroshkovyih byistrorezhuschih staley (Ultrasolidus sintering of powder high-speed steels), Moskva: GINFO, MGIU, 2003, 212 p. [in Russian].
Avt. sv. SSSR No 1537706, MPK S22S 33/02, V22F 3/10. Sposob izgotovleniya izdeliy iz poroshkov byistrorezhuschih staley / M.M. Uspenskiy, I.A. Margolin, V.I. Lyukevich. Opubl. 23.01.1990, byul. No 3. [in Russian].
Movchan V.I., Pedan L.G., Ivanitsa V.I. MiTOM, 1990, No 8, pp. 12 – 14 [in Russian].
Movchan A.V., Gubenko S.I., Bachurin A.P., Chernoivanenko E.A. Starodubovskie chteniya 2012, Dnepropetrovsk, 2012, Ussue 64, pp. 262 – 266 [in Russian].
Per Gustafson, Met. Trans.,1987, Vol. 18 A, No 2, pp. 175 –188 [in English].
https://doi.org/10.1007/BF02825699
Bunin K.P., Movchan V.I., Pedan L.G., Izv. AN SSSR. Metallyi, 1975, No 3, pp. 164 –168 [in Russian].
Movchan V.I., Pedan L.G., Gerasimenko V.P., MiTOM, 1983, No 9, pp. 19 – 21[in Russian].
Movchan O.V., Bachurin A.P., Chornoivanenko K.O., Metaloznavstvo ta obrobka metaliv, 2014, No 2, pp. 46 – 50 [in Ukrainian].
Cline H. E., Acta Met.,1971, Vol. 19, No 6, pp. 481 – 490 [in English].
Downloads
Published
Issue
Section
License
Copyright (c) 2019 O.V. Movchan, K.O. Chornoivanenko
This work is licensed under a Creative Commons Attribution 4.0 International License.
